Wide Color Range for Road Marking Applications

Standard Thermoplastic Road Marking Paint | Factory Price

It is a powder at room temperature. During application, it is heated to 180°–220° to melt it, and then applied to the road surface using specialized equipment. It is a material widely used for applying road traffic markings.

Place Of Origin: China

Main Raw Material: Resin, CaCO3, SiO2, TiO2, Plasticizer, etc.

Usage: Road Marking Materials

Other Names: Road Marking Paint, reflective road paint

Drying time：3-5 Minutes

Send Email

Chat Now

Share With:

Introduction

High-Reflectivity Thermoplastic Road Marking Paint

Reflective Marking Material consists of resin, EVA, PE wax, fillers materials, glass beads and so on. It is in powder form at normal temperature. When heated to 180-200 degrees by hydraulic cylinder pre-heater, the material turns fluid.Applied onto road surfaces with a line marking machine, it forms a tough, durable coating with clear lines and excellent wear resistance. Spraying reflective micro glass beads on the surface delivers outstanding reflective performance at night. This material is widely applied in highway and city road. We can provide various types of products to meet different environmental and construction requirements.

Parameters

Standard Marking Materials Parameters

Place of Origin:	Henan, China
Main Raw Material:	Resin, CaCO3, SiO2, TiO2, Plasticizer, etc.
Usage:	Road Marking Paint
Density (g/cm³)	1.8 - 2.3
Application Method:	Spray
State:	Powder Coating
Brand Name:	Sanaisi
Application:	Road Marking Paint
Pre-mixed Glass Bead Content：	0%（No anti-glare feature）
Feature:	Strong Adhesion
Softening point:	104℃
Compressive strength (MPa)：	≥ 12 (23℃) / ≥ 2 (60℃)
Drying time:	3-15 mins, depends on the temperature and humidity
Service:	Samples available
Advantage:	Competitive Prices
Type:	Reflective Thermoplastic road powder paint
Weight:	25kg/Bag
Ingredient:	C5 resin, EVA, PE wax, titanium dioxide, glass beads, filler materials
Heating Temperature:	180-220°C
Shelf Life:	12 Months(Ventilated and dry, protected from sunlight and isolated from fire source)

Raw Materials

Standard Thermoplastic Road Marking Paint Features And Advantages

Features

Contains no pre-mixed glass beads: 0% pre-mixed glass beads; no reflective properties

Meets basic performance standards: Softening point 90–125°C; non-sticky drying time ≤ 3 minutes; compressive strength ≥ 12 MPa (23°C)

Full, even coverage: Coating film thickness 1.5–2.5 mm; high coverage rate; good application efficiency

Advantages

Lowest Cost: Contains no glass beads, resulting in significantly lower raw material costs compared to reflective products

Strong Adhesion: High resin content; when used with a primer before application, it is less likely to peel off

Good Crack Resistance: Sufficient EVA is added to prevent cracking caused by temperature differences

Good Weather Resistance: Uses top-tier brand pigments that resist discoloration even after prolonged exposure to sunlight

Easy Application: Melting temperature of 180–220°C, the same as reflective types, requiring no special processes

Detail Display

Construction Steps

1. Road Cleaning

Before operation, the nearby area must be cleaned to ensure that there are no impurities such as oil, water,fallen leaves, weeds, etc., so as not to affect the adhesion effect, flatness and reflection effect of the line.

2. Set the Point and Mark Line

In the process of sampling, the calculation and measurement must be carried out in strict accordance withthe construction drawings. Measure the several lanes that need to be drawn on the road, set the point, andthen mark it with a stone pen, Use titanium dioxide powder to glue the hemp rope for the elastic line.After the rope is removed, it will be corrected and improved to ensure that the line shape is clear andaccurate.

3. Apply the Primer

The primer is a common binder used in thermoplastic marking construction. Applied to highway surfaces, it enables the thermoplastic coating to adhere better to the road.

4. Spray the Materials

Before construction, first check the relevant coating equipment, Then heat the material. When the trolley moves forward, the material will form a coating film on the road, and a layer of glass beads should be sprinkled on the coating film during the coating process.When the trolley moves forward, take the reference line as the ruler, control the thickness and width of the line, and ensure the coordination, clarity and smoothness of the line connection between the straight line and the curve. Note: During the coating process, in order to avoid the sedimentation and separation of the material, it is necessary to stir the material frequently.

Recommended products

Main Products

Custom Reflective Thermoplastic Road Marking Paint

Engineered for superior night visibility, our Custom Reflective Thermoplastic Paint features a high concentration of pre-mixed glass beads (≥30%). Compliant with JT/T 280-2022 standards, it ensures continuous reflectivity even after surface wear, extending road marking lifespan by over 30% while maximizing driver safety.

View Product >

Drop on glass beads

After the marking material is applied to the road surface, the glass beads are spread on the surface of the wet marking material.

View Product >

Yellow road marking materials

Yellow road marking material consists of resin, EVA, PE wax, fillers materials, glass beads and so on.

View Product >

Reflective Thermoplastic Road Marking Materials

Bs3262 standard Thermoplastic Road Marking Materials

Thermoplastic road marking material consists of resin, EVA, PE wax, fillers materials, glass beads and so on.

View Product >

Premixed glass beads

Glass beads uniformly mixed in pavement marking coating before marking.

View Product >

Faq

Frequently Asked Question

Can I get a sample of thermoplastic road marking material?

Yes, we can provide 5-10kg thermoplastic material sample for free. However, shipping cost should be payed by customers.

Can l get the solar led road stud sample to test?

Yes! We can provide samples for your test and customized samples are also available.

Can l customize the solar pavement markers to suit my needs?

Yes! Our solar pavement marker can be ordered with any different combination of available color combinations for the reflector panel, L.E.D. light and aluminum alloy body. And can print your logo in the solar studs. The unit can be of steady flashing light model, with one side or double-sided illumination.

What is the MOQ of road marking material?

For our thermoplastic powder we don't have the MOQ requirement. One bag is available and can be sold. For the cold paint, one barrel is also can be sold.

What are the payment terms?

We accept cash, TT, Western Union, Money Gram and so on .

How long will you prepare goods if we place order?

We have enough stock for most products and can arrange shipment within 3 -5days once receiving your payment. As we export goods to the whole world, we can give you a reference for shipping time to some regions: Southeast Asian countries take 7- 10days; Middle East countries need 15-20 days; African countries need about 25-35 days; South American countries need about 30-35days; North American countries need 22-30 days; European countries need 30-40 days.

What kind of shipping methods are provided?

We can provide EXW, FOB, CIF service, etc. If other suppliers also have your goods to ship, you can transport the goods to our factory. We can load the goods for free.

Can we customize our logo package of road marking paint?

Of course. We can customize your logo once we receive your order. And it needs about 10 days to print the new design bags after receiving your deposit.